Orange County - Colt, BCM, Daniel Defense, Noveske (all never-fired)

8 months ago
Orange County - Colt, BCM, Daniel Defense, Noveske (all never-fired)
Price
$425.00
Brand
Rainier
Seller
electroshock
Available on
Cal Guns
Location
Orange County
Description

I have several never-fired AR15 upper receiver assemblies that I acquired mainly during various panics over the past few years. I am the first and only owner of all of these uppers. I need to find new homes for these quality uppers so that they can actually be used.
I'm located in Orange County and I'll drive a reasonable distance to meet. No trades please. Please let me know if you have any questions.
Colt LE6920 upper receiver assembly (BCG and charging handle not included)
Caliber: 5.56 / .223
Location: Orange County
Price: $425
Will ship (Y/N): No
Other info:
This is a never-fired, factory built Colt LE6920 upper receiver assembly.
Please note that the BCG and charging handle are not included in the above price. If you want the original Colt BCG and charging handle, I will sell them at full retail price.
Specs:
-16" M4 barrel, 1/7, chrome lined, HPT/MPI
-M4 upper receiver with M4 feed ramps, "C" stamped
-M4 Handguards
-Magpul MBUS
Colt LE6920 OEM2 upper receiver assembly (BCG and charging handle not included)
Caliber: 5.56 / .223
Location: Orange County
Price: $390
Will ship (Y/N): No
Other info:
This is a never-fired, factory built Colt LE6920 OEM2 upper receiver assembly. This upper is the same as a typical Colt LE6920 upper with the exception of the front sight base, which allows a longer rail to be installed on this upper.
Please note that the BCG and charging handle are not included in the above price. If you want the original Colt BCG and charging handle, I will sell them at full retail price.
Specs:
-16" M4 barrel, 1/7, chrome lined, HPT/MPI
-M4 upper receiver with M4 feed ramps, "C" stamped
SOLD PENDING FUNDS - BCM 16" Mid Length upper receiver assembly (BCG and charging handle not included)
Caliber: 5.56 / .223
Location: Orange County
Price: $450
Will ship (Y/N): No
Other info:
This is a never-fired, factory built BCM upper receiver assembly. It features a 16" cold hammer forged barrel and mid length gas system. It also includes a BCM Mod 0 compensator.
Please note that the BCG and charging handle are not included in the above price. If you want the original BCM BCG and BCM Mod 4 charging handle, I will sell them at full retail price.
Specs:
-16" cold hammer forged barrel, 1/7, chrome lined, HPT/MPI, M4 profile
-Mid length gas system
-BCM upper receiver with M4 feed ramps
-BCM Mod 0 compensator
Daniel Defense 16" Carbine Length upper receiver assembly with Omega X 9" rail (BCG and charging handle not included)
Caliber: 5.56 / .223
Location: Orange County
Price: $675
Will ship (Y/N): No
Other info:
This is a never-fired, factory built Daniel Defense upper receiver assembly. It features a 16" cold hammer forged barrel, carbine length gas system and a Daniel Defense Omega X 9" rail.
Please note that the BCG and charging handle are not included in the above price. If you want the original Daniel Defense BCG and charging handle, I will sell them at full retail price.
Specs:
-16" cold hammer forged barrel, 1/7, chrome lined, HPT/MPI, M4 profile
-Carbine length gas system
-Daniel Defense upper receiver with M4 feed ramps
-Daniel Defense Omega X free floated 9" handguard with 1913 Picatinny rails
-Pinned low profile gas block (no FSB)
-Daniel Defense flash suppressor
Daniel Defense 16" Carbine Length upper receiver assembly (BCG, charging handle and barrel nut not included)
Caliber: 5.56 / .223
Location: Orange County
Price: $425
Will ship (Y/N): No
Other info:
This is a never-fired, factory built Daniel Defense upper receiver assembly, minus the barrel nut. It features a 16" cold hammer forged barrel and carbine length gas system. As you can see in the picture below, there is no barrel nut locking the barrel and receiver together because I had removed the free float handguard that this upper came with.
Please note that the BCG and charging handle are not included in the above price. If you want the original Daniel Defense BCG and charging handle, I will sell them at full retail price.
Specs:
-16" cold hammer forged barrel, 1/7, chrome lined, HPT/MPI, M4 profile
-Carbine length gas system
-Daniel Defense upper receiver with M4 feed ramps
-Daniel Defense FSB
-Daniel Defense flash suppressor
Noveske 16" Mid Length upper receiver assembly with SWS 11" rail
Caliber: 5.56 / .223
Location: Orange County
Price: $1625
Will ship (Y/N): No
Other info:
This is a never-fired, factory built Noveske upper receiver assembly. I acquired this upper receiver in late 2012, shortly before John Noveske's unfortunate passing. The stuff made while John was in charge was definitely sweet, particularly the barrels. I've heard opinions that the company hasn't been the same since though I've never shot nor handled Noveske's Gen3 guns. I have to imagine that pre-2013 Noveske complete uppers in mint condition like this one are rare finds.
This complete upper receiver features a 16" cold hammer forged barrel, mid length gas system and a SWS 11" rail. Everything on this upper was put together from the factory with the exception of the Troy folding sights that I installed.
As opposed to my other listings, please note that the Noveske BCG and charging handle are included in the above price.
Specs:
-16" "Light Recce" cold hammer forged barrel, 1/7, chrome lined, HPT/MPI
-Mid length gas system
-Vltor MUR upper receiver with M4 feed ramps (Noveske-marked)
-SWS free floated 11" handguard with 1913 Picatinny rails (Noveske-marked)
-Pinned low profile gas block
-AAC Blackout flash suppressor, 3 prong
-Shot peened and MP tested bolt
-Auto carrier with properly staked carrier key
-Vltor Gunfighter charging handle
-Troy front folding sight (HK style)
-Troy rear folding sight